Nomad
Product Information
Tent Capacity: 2 person
Material:
• Main tent fabric: 900 Denier grey polyester cotton
• Shell: ABS shell with aluminium honeycomb base plate
• Frame: Aluminium structure with honeycomb base and aluminium corner reinforcements
• Flysheet fabric: Black polyester with extended 4-pole design
• Mattress: 50mm Memory foam mattress with soft, ripstop polyester cover
• Ladder: 2.3m telescopic, wide-step aluminium ladder with one-click open/close system and black powder coating
Weather Resistance: Waterproof, wind-resistant, UV-protected, with full-coverage flysheet
Size/Dimensions:
• Sleeping area: 2000 x 1120 mm
• Open size: 2165 x 1290 x 1550 mm
• Closed size: 2165 x 1290 x 185 mm
• Packaging size: 2320 x 1380 x 260 mm
Setup Time:
15 minutes to install, opens in seconds with assisted gas struts
Mounting System:
Includes two bottom mounting bars and stainless steel hardware (crossbars required)
Additional Features:
• Full-length dimmable LED strip lighting with three colour modes
• Built-in charging station with USB Type-C port and lighting control panel
• Dual-layer mesh storage pockets on ceiling + centre roof organiser
• 2x roof crossbars with 4 x cross bar mounting brackets
• 2x memory foam pillows
• Rechargeable, removable electric fan
• Built-in dehumidifier bag
• Spare ladder mounting base
• German-imported 304 stainless steel gas struts
• 7-layer packaging with pearl foam, wooden board and pallet protection
• Net Weight (without accessories): 70 kg
• Gross Weight (with packaging): 107 kg
• Tent load-bearing: 300 kg
• Ladder load-bearing: 150 kg
• Top luggage load-bearing: 25 kg (when used with roof crossbars)
Material Composition:
• Water pressure rating: 5000mm
• UV Protection: UPF 50+
• Ventilation: Roof ventilation panels reduce condensation and support airflow in all weather
Storage:
• Double-layer roof net storage
• Internal organiser for personal items
• External waterproof shoe bag
Additional Technical Notes:
• Aluminium frame tested for durability in harsh conditions
• Imported 304 stainless steel fittings resist corrosion
• Custom-designed ladder and mounting system improve user safety and convenience
• Memory foam sleeping system eliminates need for additional mats
• Gas struts provide fast, smooth setup with minimal effort
Important Note:
The power bank in the images is sold separately. Click here to power your tent with this Bushwakka essential.
Solar panel and mounting plates sold separately
Installation Service Available:
Bushwakka offers professional installation services for awnings and rooftop tents at our Gold Coast HQ. Learn more or contact us at (07) 5515 7912, extension #1 for availability.
Need help with installation? View the Rooftop Tent Installation Guide

Freight Costs
- Freight costs for a Roof Top Tent are a flat rate of $279.00 for VIC, NSW, ACT, and QLD. Then $379.00 for SA, and $479.00 for TAS, WA, and NT, arranged by our Sales Team to your nearest Mainfreight Depot. Click here to view the list of Mainfreight depots.
- If you'd like to explore alternative 3rd Party Agent depots that might be closer to you, please reach out to us. Please note that additional freight costs will apply for this option.
- Alternatively, you can arrange your own freight or collect the tent from our HQ on the Gold Coast.
- Please note: Incorrect freight selection during the checkout process will be either credited during the custom quote process or refunded entirely.
Freight & Delivery Information
- Delivery Process: Roof top tents are shipped to the customer’s nearest Mainfreight depot for pickup. Customers are responsible for arranging pickup or organising onward delivery.
- Inspection at Pickup: Inspect packaging and contents thoroughly before accepting from the depot. If you notice visible damage, do not accept and contact us immediately.
- Post-Pickup Responsibility: Bushwakka is not responsible for damage, loss, or theft after the tent is accepted from the Mainfreight depot.
- Check Promptly: Inspect all parts within 7 days of pickup. Report missing or damaged parts promptly. Claims reported after 14 days may not be accepted due to difficulty determining the cause of damage.
- Important Note: Delayed inspection or reporting may limit our ability to assist with claims. Verify your tent’s condition as soon as possible after pickup.
Warranty Information
- Wind and Weather Damage Not Covered: Do not use your roof top tent in adverse weather conditions, such as high winds or storms, as damage from these is not covered under warranty.
- 12-Month Structural Warranty: Covers manufacturing and material defects only. Excludes damage from incorrect use, improper mounting, or failure to follow care instructions.
- Consumer Rights: Under Australian Consumer Law, for major structural failures, we will replace or refund at our discretion. For minor issues, we’ll work with you to find the best solution.
- Correct Mounting: Warranty coverage requires correct mounting with load-rated brackets or systems. Bushwakka reserves the right to deny claims if recommended mounting distances or approved systems (supplied, Bushwakka alternatives under ALL Accessories > Mounting Brackets, or outlined in our Fitting Advice) are not used.
- For additional information, please refer to the Warranty Information page
Care Tips
- Open Zippers Fully: Open any zippers fully before folding the bag to avoid stress on the zipper.
- Pack Canvas Tightly: Roll up the canvas tightly to minimise movement during travel and prevent rubbing and holes in the canvas.
- Protect Metal Parts: Use lanolin spray on brackets and metal components to protect against surface rust.
- Maintain Waterproofing: Apply canvas reproofer spray regularly to maintain waterproofing.
- Check Bolts Regularly: Check bolts regularly, as they may loosen during travel.
- Clean After Every Trip: Inspect and clean after every trip: Brush off dirt and debris with a soft brush. Use lukewarm water and mild, non-detergent soap for canvas or fabric. Rinse thoroughly and air-dry completely before packing.
- Manage Condensation: Wipe down interior condensation before packing. Always ventilate and use moisture absorbers to assist with condensation.
- Prevent Mould: Fully dry the tent before storing, ideally in a shaded, well-ventilated area. If wet or condensation forms, set up the tent at home or partially open it to dry completely. Use a fan in humid conditions to speed up drying.
- Maintain Zippers: Clean zippers with a soft brush to remove sand or dust. Apply silicone-based lubricant or wax to keep zippers smooth. Open and close fully when packing.
- Check Mounting Hardware: Before and after trips, tighten bolts, brackets, and rails.
- Prevent Rust: Apply lanolin spray or rust-preventive lubricant to metal parts (ladders, hinges) every 3–6 months. Clean with fresh water after coastal trips.
- Pack Securely for Travel: Fold the tent tightly and secure in its cover to prevent rubbing or tears. Use extra tie-down straps on corrugated roads.
- Store Properly: Keep in a dry, well-ventilated, shaded area, elevated off the ground. Use a breathable cover if stored on a vehicle.
- Avoid Overloading: Do not exceed the tent's maximum weight capacity to prevent structural damage
Fitting Advice
- Warranty claims may be denied if the roof top tent is not mounted with load-rated brackets or systems.
- Use supplied mounting systems or Bushwakka-approved alternatives listed in our Fitting Advice
Have a question?

Nomad

